Electronic Hearing Aid Dryer Dehumidifier Drying Box for Hearing Aids
Thanks for using our product.Read these instructions carefully before using A*AID200 series electric drying case and keep them in a safe place for future reference.
A’AID200 electric drying case is specially designed to dry hearing aids and other pint-sized sophisticated electronic products.This product sticks the heat generation element to an aluminium plate,and its center spacer separates the object which needs being dried from the heatconducting aluminium plate.Thereby,the object is dried by the heated air in the case.This can avoid damage to the object due to accidental excessive heat.
Method of operation
1、Switch in 12vpower and the power light will be on.The electric drying case begins to work.(Only for Aid 200D)
2、Sweep off any water spot or blot on the surface of hearing aids,open the battery door,take battery out,put hearing aids into drying case,and then shut its lid.
3、Press the timing button(3H or 6H),and the power light will be on.The electric drying case begins to work.
4、When the electric drying case works for 3 hours or 6 hours, it stops with power light off.
5、After it starts,time counting will be restarted if the timing button is pressed again.
2、Relative air humidity is less than 80%RH.（Temperature is 25℃)
3、No combustible gas,aggressive gas or electrically conducting dust exists in the surrounding environment.
1、Any water spot or blot on the surface of hearing aids must be swept clean before drying,battery door should be opened and battery should be taken out.
2、The time for object to be dried cannot exceed 12 hours in
3、Please clean the hearing aids polluted by battery weeping
4、No covering the body of electric drying case when it is working.
5、Please pluck off power plug when electric drying case ends
6、Dismantlement of repair by yourself is forbidden.